Devolo dLAN® 200 AVeasy Network Kit Manual de Serviço descarregar pdf (Página 12)

Initial use

devolo dLAN 200 AVeasy

3.3.1 Control lamps (LEDs)

3.3.2 Connection

 Network connection

 This is the connection point on the dLAN 200 AVeasy for connecting it

to a computer or another network device with the network cable

(included).

3.3.3 Encryption button

 Data encryption at the touch of a button;

 For more information on the functions of the encryption button, please

see the chapter 4.1 '

dLAN 200 AVeasy network encryption at the touch

of a button'.

Please note that all dLAN 200 AV devices to be connected to your network are

also connected to your household power grid. dLAN 200 AV devices switch to

Standby mode after approx. 20 minutes if no active network device such as a

computer is connected to the network port. In Standby mode, the dLAN 200 AV

device cannot be accessed via the power supply grid. As soon as the network

device (e.g. computer) connected to the network interface is switched on again,

your dLAN 200 AV can also be reached again via the power grid.

Power

green Lit steady when dLAN 200 AVeasy is operational.

orange Lit steady when the dLAN 200 AVeasy is in standby mode.

dLAN Link/Act

green Lit steady when a connection with the dLAN 200 AV network

exists; flashes when data is being sent or received via the

power grid in the dLAN 200 AV network.

red Lit steady when dLAN adapter signals are detected;

flashes when data is being sent or received via the power

grid.

orange Lit steady when connected to a dLAN 200 AV network and

dLAN adapter signals are detected;

flashes when data is being sent or received via the power

grid in the dLAN 200 AV network and dLAN adapter signals

are detected.

ETH/ACT

green Lit steady when a 100 Mbps or 10 Mbps connection to the

Ethernet network exists;

flashes when data is being transmitted.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 32 33

Sem comentários

Devolo dLAN® 200 AVeasy Network Kit Manual de Serviço Página 12